The Micro SD Card module has 6 pins; those are GND, VCC, MISO, MOSI, SCK, and CS. All the pins of this sensor module are digital, except VCC and Ground. -> GND is the ground pin of the micro sd card ...

The pinout of the HPD13A - SX1276-based LoRa module is shown below. For this tutorial, we will be using the HDP13A V1.1 LoRa Module which is designed and developed by HPDTeK a well-known manufacturer ...

Pin 2 on the Arduino schematic is really GPIO2 on the NINA, therefore it should not be labeled GPIO34. This is confirmed by the fact that the pin numbering on the Arduino schematic matches the pin ...

When it comes to giving your project wireless capabilities, the 433MHz ASK transmitter and receiver is a common choice among engineers, developers, and hobbyists because of its low price, easy to use ...

The concept of automation is getting popularity among people these days and many of them control their lighting, climate, etc remotely at their homes. Several microcontrollers or microprocessors can ...

If you are designing your own intelligent “Graden Computer” with an optional digital plant moisture sensor/water pump controller that lights an LED to alert the user when it is time to water a potted ...

Arduino Nicla Sense Env is a new sensor module with temperature, humidity, and gas (TVOC, NO2, O3) sensing that follows the launch of the Arduino Nicla Sense ME (Motion & Environment) module over ...

“You can’t put new wine in old bottles” – so the saying goes. But you would if you’re a hacker stuck with a radio built in 2005, which looked like it was put together using technology from 1975.